Faux Wood Floor



Transform simple plywood flooring into wooden planks...that will fool everyone! Supplies and directions follow.

step one
step two step three  
FauxSupplies available by calling us at 1-800-822-7836

Woody Yellow Aqua Bond
Antique Mahogany Stain and Seal
Ebony Stain and Seal
Mottling and Flogging Brushes

1. Paint floor with two coats of Woody Yellow Aqua Bond.
2. Measure off 6" and 10" strips using the edges of the boards as natural edges.
3. Tape off all 6" strips and brush Antique Mahogany one plank at a time.
4. Drag mottling brush down board to get rid of brush marks.
5. Slap flogging brush along wet Seal going from bottom to top of plank.
6. Finish all 6" planks and let dry. Repeat with 10" planks yet don't tape the edges. Let the Seal overlap slightly onto the 6" boards to create an irregular seam.
7. Varnish.
Tip: For new plywood: beat first with a chain to create a weathered look before painting.

 |   |   |   |   |   | 
Sign up for DS Emails:
HACKER SAFE certified sites prevent over 99.9% of hacker crime.